The main advantages of our bi-xenon projectors

• Multiply stronger light output 
• A high beam source will be added, the original high beams may or may not be retained. It's up to you.
• Projectors are unlike the original made from aluminiumso that it won't warp or burn even after years. At the same time, they also help to better dissipate heat, which makes the projector chrome has a longer life than the original lights.
• The projector's aperture is laser cut to achieve the most accurate light refraction. At the same time, it does not let any light above the refraction, so it does not glare on oncoming vehicles.
• Projectors have crystal clear lenswhich is used for maximum brightness and leaves a blue coloured refraction.

This is a simple conversion that even complete beginners can handle. There is no need to unstick the front Plexiglas for the lights. Everything can be done through the hole to change the lamp and, if you ignore the dismantling and fitting of the headlights, you can expect the job to take between one and two hours. 

The kit is assembled to be completely Plug & Play, which means that there is no need to modify anything for the installation. We also create for each car detailed guide, which will completely guide you through the installation, or we can help you with the installation via phone, email or social media. 

The set includes two bi-xenon projectors, bulb holders, adapters, and all the necessary mounting hardware for installation. 

The projector fits the original D1S xenon lamps, so there is no need to purchase new ones for the conversion. LEDs with D1S socket can also be used.

To ensure perfect brightness, the headlight lenses must be in good condition. Cracked or yellowed lenses distort the light refraction, which can cause glare for oncoming vehicles and significantly reduce brightness. In our offer, we have headlight covers for Ford Mondeo Mk4which you can find here.

The set is not intended for use on public roads. 

The set is designed for OEM Xenon headlights.

Článek Ford Mondeo mk4 | Bi-xenon sada se nejdříve objevil na Retrofit Guru.

This is a simple retrofit that even complete beginners can handle. The headlight lenses need to be opened, but since they are sealed from the factory with butyl adhesive, the process is easy to manage using a heat gun.

The kit is assembled to be completely Plug & Play, which means that there is no need to modify anything for the installation. We also create for each car detailed guide, which will completely guide you through the installation, or we can help you with the installation via phone, email or social media. 

The kit includes two bi-xenon projectors, a butyl sealing cord, bulb holders, and all necessary mounting hardware for installation.

The projector fits the original D1S xenon lamps, so there is no need to purchase new ones for the conversion. LEDs with D1S socket can also be used.

The set is not intended for use on public roads. 

The set is designed for OEM Xenon headlights. For use with aftermarket units, we recommend contacting us first to confirm compatibility.

Článek Ford S-Max mk1 | Bi-xenon sada se nejdříve objevil na Retrofit Guru.

The main advantages of our bi-xenon projectors

• Multiply stronger light output 
• A high beam source will be added, the original high beams may or may not be retained. It's up to you.
• Projectors are unlike the original made from aluminiumso that it won't warp or burn even after years. At the same time, they also help to better dissipate heat, which makes the projector chrome has a longer life than the original lights.
• The projector's aperture is laser cut to achieve the most accurate light refraction. At the same time, it does not let any light above the refraction, so it does not glare on oncoming vehicles.
• Projectors have crystal clear lenswhich is used for maximum brightness and leaves a blue coloured refraction.

This is a straightforward retrofit that even complete beginners can handle. There is no need to separate the front lenses of the headlights. Everything can be done through the bulb replacement opening, and apart from removing and reinstalling the headlights on the car, you can expect the process to take one to two hours. 

The kit is assembled to be completely Plug & Play, which means that there is no need to modify anything for the installation. We also create for each car video tutorial, which will completely guide you through the installation, or we can help you with the installation via phone, email or social media.

The set includes two bi-xenon projectors, cables from the aperture electromagnets, bulb holders, two adapters, all necessary fasteners for installation, cable connectors for connection to the original driving lights. 

The projector fits the original D2S xenon lamps, so there is no need to purchase new ones for the conversion. LEDs with D2S socket can also be used.

The set is designed for OEM Xenon headlights. For use in Depo aftermarket lights, please contact us.

The set is not intended for use on public roads. 

Článek Audi TT mk1 98 – 06 | Bi-xenon sada se nejdříve objevil na Retrofit Guru.

The main advantages of our bi-xenon projectors

• Multiply stronger light output 
• A high beam source will be added, the original high beams may or may not be retained. It's up to you.
• Projectors are unlike the original made from aluminiumso that it won't warp or burn even after years. At the same time, they also help to better dissipate heat, which makes the projector chrome has a longer life than the original lights.
• The projector's aperture is laser cut to achieve the most accurate light refraction. At the same time, it does not let any light above the refraction, so it does not glare on oncoming vehicles.
• Projectors have crystal clear lenswhich is used for maximum brightness and leaves a blue coloured refraction.

This is a simple conversion that even complete beginners can handle. There is no need to unstick the front Plexiglas for the lights. Everything can be done through the hole to change the lamp and, if you ignore the dismantling and fitting of the headlights, you can expect the job to take between one and two hours. 

The kit is assembled to be completely Plug & Play, which means that there is no need to modify anything for the installation. We also create for each car video tutorial, which will completely guide you through the installation, or we can help you with the installation via phone, email or social media. 

The set includes two bi-xenon projectors, cables from the aperture electromagnets, lamp holders, all necessary fasteners for installation, self-cutting connectors for connection to the original driving lights. 

The projector fits the original D2S xenon lamps, so there is no need to purchase new ones for the conversion. LEDs with D2S socket can also be used.

The set is not intended for use on public roads. 

The set is designed for OEM Xenon headlights, does not fit the pre-facelift and allroad model. For these you will find a set here.

Článek Audi A6/S6/RS6 C5 Facelift 02 – 05 | Bi-xenon sada se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. In your headlight, it is permanent adhesive usedso the light is quite difficult to break. Some people here cut off old plexiglass to make it easier to take down, but it's fine without that.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel BMW 7 F01, F02 09-15 se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. Your headlight uses butyl adhesive, so it can be easily separated.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel Audi A6 C6 (4F) se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. Your headlight uses butyl adhesive, so it can be easily separated.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel Škoda Superb 3 se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. In your headlight, it is permanent adhesive usedso the light is quite difficult to break. Some people here cut off old plexiglass to make it easier to take down, but it's fine without that.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel Škoda Superb 2 facelift se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. In your headlight, it is permanent adhesive usedso the light is quite difficult to break. Some people here cut off old plexiglass to make it easier to take down, but it's fine without that.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel Škoda Superb 2 předfacelift se nejdříve objevil na Retrofit Guru.

The original headlight covers often suffer from yellowing, cracks, damage from stones, or weather conditions. Our covers not only fit perfectly but are also coated with a layer of UV-resistant polyurethanewhich protects against future damage and yellowing.

For a perfect seal we recommend 9.5mm x 4.5m butyl gasket. It is easy to work with and if it is necessary you can then simply unstick the light using a heat gun or oven.

The difficulty of replacement depends on the type of adhesive used to bond the cover to the rest of the headlight. In practice, mainly butyl and permanent adhesives are used. Your headlight uses butyl adhesive, so it can be easily separated.

If you're interested, installation of the headlight lenses can be arranged. For a price quote, please contact us via email or reach out to us on social media.

Článek Kryty světel Škoda Octavia 3 facelift se nejdříve objevil na Retrofit Guru.