Ford S-Max mk1
Audi TT mk1
Ford Mondeo Mk4
Octavia 1
Fabia 1
1 / 5
Octavia 2 04 - 13 Bi-xenon kit
Bi-xenon retrofit kit for the pre-facelift Octavia 2 that replaces the original faded xenon projectors with much more powerful bi-xenon projectors, keeping the original headlight aiming and automatic levelling.
While the headlights are off
For full output the lenses must be in good shape. Yellowed or scratched lenses scatter light and blur the sharp cut-off. While you are removing the headlights anyway, it pays to replace the covers at the same time.
Even complete beginners can do it
The front lenses stay sealed. Everything is done through the bulb opening. Not counting removing and refitting the headlights, it takes one to two hours.
A written guide for Octavia 2 pre-facelift is on its way. If you get stuck during fitting, call us: 736 443 413
An electrically controlled shield gives you two beams.
The reflector focuses the bulb's light to the lens's focal point. That is where the shield sits. The lens projects a sharp cut-off onto the road.
Low beam
The shield absorbs the lower half of the rays heading into the lens. The lens flips the image so light shines only below the cut-off. The result is a sharp cut-off that rises to the right towards the roadside. As a result, oncoming drivers are not dazzled.
High beam
A solenoid folds the shield down and all the rays pass through the lens. The cut-off disappears and the light shines like the low beam, plus far ahead of the car. The original halogen high beams shine at the same time.
Why original projectors barely shine after years
Inside the original projector, a reflector has a thin chrome layer. Over the years, heat and UV from the bulb burn it off. The surface turns dull or black and light has nothing to bounce off. The bulb shines, but only a fraction of its light reaches the road.
A burnt original projector next to a new one from our kit. Drag the slider.
A reflector that lasts much longer
The reflector is made from aluminum. It dissipates heat better, so the chrome lasts much longer than the original, and the reflector doesn't warp. Light bounces off the whole surface, not just what is left of it.
Geometry like modern cars
The reflector, shield and lens follow modern projector design, not the technology from when the car left the factory. More light from the bulb reaches the lens and is then projected onto the road.
Sharp cut-off, clear lens
The shield is laser-cut, so the cut-off is sharp and oncoming drivers are not dazzled. The crystal-clear lens lets through maximum light and leaves the typical blue edge.
Before you order
Only for original xenon headlights
The kit is for original Octavia 2 pre-facelift xenon headlights. Have aftermarket Depo headlights? Write to us before you order.
Lenses must be in good condition
Cracked or yellowed lenses disrupt the cut-off, cause glare, and reduce output. We have new headlight covers for this car.
Road use
The kit is not intended for use on public roads.
Frequently asked questions
Did not find your answer? Write to us.
How do I know I have original xenons?
Your headlight will carry the car maker’s logo or be made by Hella, AL or ZKW. The surest way is to send us a photo of the back of the headlight. We will confirm whether the kit fits.
Can I fit it myself?
Yes. Every kit comes with a guide, and if you get stuck, we will help.
Will automatic leveling still work?
Yes. The original aiming and automatic leveling stay. Because the new projectors mount on the original fixings, the retrofit comes with no compromises.
What about high beams?
The kit also works as a high beam. You can keep the original halogen high beam connected; then both sources shine.
Can I use LED bulbs?
Yes, if they have a base.
Full kit description
Our retrofit kit for Škoda Octavia 2 prefacelift (2004-2013) contains everything you need to replace the original xenon projectors (xenon only illuminates low beam) to a much more powerful bi-xenon projectors (xenon lights for low beam and high beam) with keeping the original adjustment and automatic levelling of the lights.
The main advantages of our bi-xenon projectors
- Multiply stronger light output
- A high beam source will be added, the original high beams may or may not be retained. It's up to you.
- Projectors are unlike the original made from aluminiumso that it won't warp or burn even after years. At the same time, they also help to better dissipate heat, which makes the projector chrome has a longer life than the original lights.
- The projector's aperture is laser cut to achieve the most accurate light refraction. At the same time, it does not let any light above the refraction, so it does not glare on oncoming vehicles.
- Projectors have crystal clear lenswhich is used for maximum brightness and leaves a blue coloured refraction.
This is a simple conversion that even complete beginners can handle. The lights need to have the Plexiglas glass unglued, but they are factory sealed with butyl, so it's relatively easy.
Set is composed to be completely Plug & Play, which means that there is no need to modify anything for the installation. We also create for each car video tutorialwho will guide you through the installation, or we can help you with the installation via phone, email or social networks.
Included in the set are two bi-xenon projectors, cables from the aperture solenoids, lamp holders, four adapters (two for each light), butyl cord to seal the plexiglass, all necessary fasteners for installation, self-tapping couplers to connect to the original driving lights.
The projector fits the original D1S xenon lamps, so there is no need to purchase new ones for the conversion. LEDs with D1S socket can also be used.
For perfect luminosity you also need to have the plexiglass in good condition. Cracked or yellowed plexiglass refracts the light and this can cause glare from oncoming vehicles and will also significantly reduce luminosity. For Octavia 2 before facelift we have plexiglass here.
The set is not intended for use on public roads.
The set is designed for OEM Xenon headlights.
Čeština 
English (UK)